Toshiba e-STUDIO165 Service Manual page 12

* "–" means "Not acceptable".
* The copy speed in the above table are available when originals are manually placed for single side,
multiple copying.
* When the ADF and RADF are used, the copy speed of 16[20] {23} sheets per minute is only avail-
able under the following conditions:
• Original/Mode:
• Number of sheets:
• Reproduction ratio:
Copy speed for thick paper (Copies/min.)
e-STUDIO165/167/205/207/237
2
Thick 1 (81 g/m to 105 g/m
only
2
Thick 2 (106 g/m to 163 g/m
Copy paper
Drawer PFU
Size A3, A4, A4-R, B4, B5, B5-R,
A5-R(Only for PFP), LD, LG, LT, LT-R,
ST-R(Only for PFP), FOLIO, COMPUTER,
13"LG, 8K, 16K, 16K-R
Weight 2
64 to 80 g/m , 17 lb. Bond to 21.3 lb. Bond
Special –
paper
First copy time ..................... e-STUDIO165/167/205/207
Warming-up time.................. Approx. 25 sec. (temperature: 20°C)
Multiple copying ................... Up to 999 copies; Key in set numbers
Reproduction ratio ............... Actual ratio: 100±0.5%
Resolution/Gradation ........... Scanning: 600 dpi x 600 dpi
Eliminated portion ................ Leading edges: 3.0±2.0 mm, Side/trailing edges: 2.0±2.0 mm (copy)
e-STUDIO165/167/205/207/237
SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
Single side original/A4/LT size. APS/automatic density are not selected.
16[20] {23} or more.
100%
2
, 21.3 lb. Bond to 28 lb. Bond): Bypass feed on a sheet by sheet baisis
2
, 28 lb. Bond to 90 lb. Index): Bypass feed on a sheet by sheet baisis only
PFP ADU
50 to 163 g/m
Approx. 7.6 sec. (A4, 100%, original placed manually)
Approx. 7.7 sec. (LT, 100%, original placed manually)
e-STUDIO237
Approx. 7.5 sec. (A4/LT, 100%, original placed manually)
Zooming: 25 to 200% in increments of 1%
Printing: Equivalent to 2400 dpi x 600 dpi
Gradation: 256 steps
Leading / trailing edges: 5.0±2.0 mm, Side edges: 5.0±2.0 mm (print)
1 - 2
07/02
Bypass copy
A3 to A5-R, LD to ST-R,
FOLIO, COMPUTER, 13"LG,
8.5" x 8.5", 8K, 16K, 16K-R
(Non-standard or user-speci-
fied sizes can be set.)
2
(Single paper feeding)
2
64 to 80 g/m
(Continuous feeding)
Tracing paper, labels, OHP film
(thickness: 80 µm or thicker),
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Remarks
These special papers
recommended by
Toshiba Tec