Toshiba e-STUDIO165 Service Manual page 142

[Procedure to key in adjustment values]
In accordance with the procedure described below, make adjustment of each adjustment item so that
the measured values obtained from test copies satisfy the specification.
[POWER]
1
[Digital keys]
[ENTER]
[Digital keys] :Enter adjustment values.
([CLEAR] Use to make corrections)
[ENTER]
[INTERRUPT]
Test copy
[INTERRUPT] :Move to the adjustment
[Power]
OFF/ON
e-STUDIO165/167/205/207/237
ADJUSTMENT
<Operation keys>
[0][5]
:Enter the code.
:Current adjustment
value is displayed.
:Move to the normal
mode.
mode.
If the test copy does not
satisfy the specified values,
return to step 1 and
repeat the adjustment
procedure.
:Exit the Adjustment Mode.
<Display>
READY
100% NONSORT
ZOOM FINISHING
Fig. 3-5
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved
3 - 4
1
EDIT