Table of Contents
Advertisement
7.5.1
This setting sets a feed amount so that the label is shifted forward or backward from the print start position which
has been automatically determined.
Max.
Min.
value
value
+50.0
-50.0
Default value: 0.0mm
<Supplemental Explanations>
(1)
The printer is controlled by the total amount determined by this command and the Position Fine Adjustment
command sent from the PC. However, the maximum value is ±50.0 mm.
(2)
When the feed amount fine adjustment value for the positive (+) direction is set to more than +14.0 mm (the
distance between the print head and the sensor is –2 mm), the actual print position is corrected by +14.0 mm.
Support mode (o：valid、x：invalid）
TPCL, TPCL1,
LABEL
o
Feed Amount Fine Adjustment (FEED ADJ.)
Step
Display
Sign
0.1
Decimal
Exist
+0.0 mm
+3.0 mm
-3.0 mm
Paper feed direction
C Mode
o
Integer
Decimal
digit
place
2
1
Print start
position
Print start
position
Print start position
ESC/POS
Z Mode
RECEIPT,RECEIP
T1
o
o
-80-
0-padding
Unit of
measure
None
mm
One label
One label
One label
S Mode
o
Advertisement
Table of Contents
