(3)
Loosen the hinge screws at the front side.
(4)
Position the pins with the holes on the ADF/
RADF by moving it so that the pins fit into the
holes when the ADF/RADF is closed.
(5)
Tighten the left-hand hinge screw at the rear
side.
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 3-42
Fig. 3-43
Fig. 3-44
3 - 49
e-STUDIO165/167/205/207/237
ADJUSTMENT
3