Toshiba e-STUDIO165 Service Manual page 81

Classifi-
Code
cation
694 FAX PIN Number setting
695 General Toner remaining check
function (supports embed-
ded IC chip)
698 Paper Limit function for the num-
feeding ber of paper exit
699 Paper Limit number setting for
feeding paper exit
702 Mainte- Remote-controlled service
nance function
703 Mainte- Remote-controlled service
nance HTTP server
URL setting
707 Mainte- Remote-controlled service
nance HTTP initially-registered
server
URL setting
710 Mainte- Short time interval setting
nance of recovery from Emer-
(Remote) gency Mode
711 Mainte- Short time interval setting
nance of Emergency Mode
(Remote)
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Setting mode (08)
Default
Func- <Accept-
Items
tion
value>
FAX
ALL EUR: 1
CND: 1
KRD: 1
TWD: 1
Other: 1
ALL
ALL
<1-999>
ALL
ALL
ALL https://
device.
mfp-
support.
com:443/
device/
firstregist.
ashx
ALL
<1-48>
ALL
<30-360>
2 - 59
08/11
RAM Contents
able
0 M 0: Enables the PIN
<0-1> number addition:
Keypad dialing
(direct entry with
digital keys) and oth-
ers.
1: Enables the PIN
number addition:
Only for Keypad
dialing (direct entry
with digital keys).
M Checks whether the
UC: 1 toner cartridge is
inserted or not.
0: Check function dis-
abled (08-971 is
automatically
<0-1> changed to "3: Toner
near-empty detec-
tion disabled".)
1: Check function
enabled (08-971 is
automatically
changed to "1: Toner
near empty thresh-
old value (stan-
dard)".)
1 M 0: OFF
<0-1> 1: ON
Number set at 08-699
will be set as the limit
number of paper exit.
250 M Sets the limit number of
paper exit for 08-698
2 CTL 0: Valid (Remote-con-
<0-2> trolled server)
1: Valid (L2)
2: Invalid
- CTL Maximum 256 Bytes
CTL Maximum 256 Bytes
24 CTL Sets the time interval to
recover from the Emer-
gency Mode to the Nor-
mal Mode.
(Unit: Hour)
60 CTL Unit: Minute
e-STUDIO165/167/205/207/237
ERROR CODE AND SELF-DIAGNOSTIC MODE
Proce-
dure
1
2
1
1
1
1
1
1
1
1