Toshiba e-STUDIO165 Service Manual page 75

Classifi-
Code
cation
481 Paper Automatic change of paper
feeding source
482 Paper Feeding retry setting
feeding
483 Laser Pre-running rotation of
polygonal motor
486 Laser Timing of auto-clearing of
polygonal motor pre-run-
ning rotation
502 Image Error diffusion and dither
setting at photo mode
510 FAX FAX automatic transmis-
sion
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Setting mode (08)
Default
Func- <Accept-
Items
tion
value>
PPC
ALL
ALL
ALL
PPC
FAX
2 - 53
06/06
RAM Contents
able
1 SYS Sets whether or not
<0-1> changing the drawer
automatically to the
other drawer with the
paper of the same size
when paper in the
selected drawer has run
out.
0: OFF
1: ON
0 M 0: ON
<0-1> 1: OFF
0 SYS Sets whether or not
<0-2> switching the polygonal
motor from the standby
rotation to the normal
rotation when the origi-
nal is set on the ADF/
RADF or the platen
cover is opened.
0: Valid (when using
ADF/RADF and the
original is set manu-
ally)
1: Invalid
2: Valid (when using
ADF/RADF only)
0 SYS Switches the polygonal
<0-2> motor to the standby
rotation when a certain
period of time has
passed from the pre-
running. At this code,
the period to switch the
status to the standby
rotation is set.
0: 15 sec.1: 30 sec.
2: 45 sec.
* This setting is effec-
tive when "0" or "2"
is set at 08-483.
1 SYS Sets the image repro-
<0-1> duction method at photo
mode.
0: Error diffusion
1: Dither
1 0:Automatic transmis-
<0-1> sion
1:Do not automatic
transmission
e-STUDIO165/167/205/207/237
ERROR CODE AND SELF-DIAGNOSTIC MODE
Proce-
dure
1
2
1
1
1
1
1