Toshiba e-STUDIO165 Service Manual page 106

[A] 01. OPE PANEL TEST
This test checks the control panel display. When any key other than START and CLEAR/STOP is
pressed during the display test, O and X are displayed alternately in the lower right of the display.
<Key used in operation>
1 3 Power ON
01.OPE. PANEL TEST
ENTER
START
CLEAR/STOP
e-STUDIO165/167/205/207/237
ERROR CODE AND SELF-DIAGNOSTIC MODE
Select test menu
All display dots keep
turning on and off alternatery
for one second each.
(All LEDs turn on.)
The cursor moves (from the
upper left to the lower right).
Fig. 2-5
2 - 84
<Display messages>
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved