Toshiba e-STUDIO165 Service Manual page 196

[B] Adjustment
Simplex copying (ADF/RADF)
(1) Turn the power ON while pressing [0] and [5] simultaneously, key in [365] and then press the
[ENTER] button.
(2) Enter the value.
• If the leading edge (F) margin of the copy image is larger than the (E) margin of the chart,
enter a value smaller than the current one.
Note: Note:
Changing one value shifts the copy image by 0.2 mm.
• If the leading edge (F) margin of the copy image is smaller than the (E) margin of the chart,
enter a value larger than the current one.
Note: Note:
Changing one value shifts the copy image by 0.2 mm.
(3) Press the [ENTER] button.
Duplex copying (RADF):
(1) Turn the power ON while pressing [0] and [5] simultaneously, key in [366] and then press the
[ENTER] button.
(2) Enter the value.
• If the leading edge (F) margin of the copy image is larger than the (E) margin of the chart,
enter a value smaller than the current one.
Note: Note:
Changing one value shifts the copy image by 0.2 mm.
• If the leading edge (F) margin of the copy image is smaller than the (E) margin of the chart,
enter a value larger than the current one.
Note: Note:
Changing one value shifts the copy image by 0.2 mm.
(3) Press the [ENTER] button.
e-STUDIO165/167/205/207/237
ADJUSTMENT
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved
3 - 58