Toshiba e-STUDIO165 Service Manual page 107

[B] 02. PRINT TEST
The test pattern is printed when a number is entered according to the displayed instructions.
<Key used in operation>
1 3 Power ON
02.PRINT TEST
ENTER
Digital Keys
ENTER
Digital Keys
ENTER
START
CLEAR/STOP
TEST PRINT ITEMS
Code Types of test pattern
111 Primary scanning direction 33 gradation steps
113 Secondary scanning direction 33 gradation steps
142 Grid pattern
149 Solid black pattern (Whole area)
[C] 03. MODEM TEST (Factory test)
Refer to the Service Handbook (GD-1220/1221).
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Select test menu
Enter print code
Select paper cassette (C)
*1
*1: Be sure to press this key after printing starts.
(If this key is not pressed, the copier keeps printing)
Fig. 2-6
2 - 85
08/06
<Display messages>
P =
111
C =
C
0: Bypass
1: Drawer
2: PFU
3: PFP upper drawer
4: PFP lower drawer
Remarks
Error diffusion
Error diffusion
Pattern width: 2 dots, Pitch: 10 mm
A3/LD
e-STUDIO165/167/205/207/237
ERROR CODE AND SELF-DIAGNOSTIC MODE
111
Print code
2