Toshiba e-STUDIO165 Service Manual page 32

Classi-
Code
fication
280 Process Forced performing of idling
for toner recycle
286 Laser Laser power adjustment
305 Scanner Image location adjustment
of secondary scanning
direction
(scanner section)
306 Scanner Image location adjustment
of primary scanning direc-
tion
(scanner section)
310 Scanner Forced performing of peak
detection
311 Scanner LED (R) current effective
value setting
312 Scanner LED (B) current effective
value setting
313 Scanner LED (YG) current effective
value setting
340 Scanner Reproduction ratio adjust-
ment of secondary scan-
ning direction
(scanner section)
e-STUDIO165/167/205/207/237
ERROR CODE AND SELF-DIAGNOSTIC MODE
Adjustment mode (05)
Func-
Items
tion
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
2 - 10
07/02
Default
<Accept-
RAM
able
value>
- M Perform this adjustment
before the replacement
of the developer mate-
rial. (The toner is forcibly
removed from the
cleaner.)
During performing this
adjustment, the density
LED blinks.
16 cpm / M When the value
20 cpm: increases, the laser out-
60 put increases corre-
23 cpm: spondingly.
70
<0-255>
105 SYS When the value
<51-206> increases by "1", the
image shifts by approx.
0.0640 mm toward the
trailing edge of the
paper.
During this adjustment,
the density LED blinks.
127 SYS When the value
<121- increases by "1", the
136> image shifts by approx.
0.169 mm toward the
front side of the paper.
During this adjustment,
the density LED blinks.
- - Activates the light inten-
sity adjustment control.
During this adjustment,
the density LED blinks.
76 SYS Displays total of the ini-
<0-255> tial value and light inten-
sity correction value.
62 SYS Displays total of the ini-
<0-255> tial value and light inten-
sity correction value.
160 SYS Displays total of the ini-
<0-255> tial value and light inten-
sity correction value.
134 SYS When the value
<76-181> increases by "1", the
reproduction ratio in the
secondary scanning
direction (vertical to
paper feeding direction)
increases by approx.
0.0947%.
During this adjustment,
the density LED blinks.
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Proce-
Contents
dure
3
7
1
1
6
1
1
1
1