Specifying Whether The Destination Name Is Inserted; Specifying The Setting For The "Tx Report" Parameter - Minolta Scanner Mode User Manual

8

Specifying whether the destination name is inserted

➜
Touch [Set 1], and then
touch [Dest. Insert].
[Dest. Insert] is highlighted.
Note
The destination name can
be inserted only if the
transmission source
information is added.
The destination name must have been registered as a one-touch key
in advance. Refer to "Registering as a One-Touch Key" on page 8-5.

Specifying the setting for the "TX Report" parameter

1
Touch [Set 1], and then
touch [TX Report].
8-24
Performing an Internet Fax/IP Address FAX Operation
Scanner Mode