Table of Contents
Advertisement
13
10
Touch either [ON] or [OFF],
and then touch [Enter].
11
Check the F code settings, and then touch [Enter].
12
Touch [RX Doc. Settings].
13
Select the procedure that
should be performed.
❍
If [Forward] or
[Prt&Forward] was
selected, also select a
forwarding destination.
❍
To specify multiple
recipients, touch [Add
Dest.], and then select
the next recipient.
14
Continue touching [Enter] to return to the Utility screen, and then touch
[Exit] to return to the standby screen (initial screen).
13-38
Specifying Management Settings
Scanner Mode
Advertisement
Table of Contents
