Table of Contents
Advertisement
8
8.6
Transmitting to Multiple Recipients (Broadcast
Transmission)
G
The same document can be sent to multiple recipients at one time.
G
A maximum of 300 recipients can be specified for the same
transmission. However, if recipients are specified using 10-key Dialing
screen, only a maximum of 12 can be specified.
Specifying using the one-touch keys
For details, refer to "Selecting a Recipient From the List on the One-Touch
Screen" on page 4-5.
1
Position the document(s).
2
Press the [Fax/Scan] key.
❍
For a copier, press the [Scan] key.
3
From the list of one-touch keys, select all recipients where the data is
to be sent.
4
Press the [Start] key.
Specifying using 10-key Dialing screen
1
Position the document(s).
2
Press the [Fax/Scan] key.
❍
For a copier, press the [Scan] key.
3
Touch [Com. Mode], and then touch [InternetFAX], then [E-mail].
4
Type in the e-mail address of the recipient on the 10-key Dialing
screen.
5
Touch [Add Dest.].
6
Type in the e-mail address of the next recipient.
7
Repeat steps 5 through 7 until all e-mail addresses are specified.
8
Press the [Start] key.
8-32
Performing an Internet Fax/IP Address FAX Operation
Scanner Mode
Advertisement
Table of Contents
