Copier Domain Name And Registering With A Dns Server - Minolta Scanner Mode User Manual

Preparation
Operation
Parameter
Devide
2
Setting
File Destination Memory Input
File
Destination
-
Memory
Input
Ping
This function is used to check if the network connection (LAN connection) is correctly connected.
*The ping can be sent with an SMTP server or POP3 server specified. In addition, a ping can be sent with
any IP address specified.
Frame Type Setting
When connecting to the NetWare server and using the PC print function, specify the frame type.
Administrator mode in PageScope Light: [Network]>[FTP Server]>[FTP Configuration]
Proxy
server -
address
Proxy port
-
number
FTP
Connection -
Timeout
* 1: If the "URL Report" function is used, the e-mail transmission (SMTP) settings must be
specified. (Refer to page 3-11.)

Copier domain name and registering with a DNS server

In order to perform Network Fax transmissions through a mail server, this
copier must be registered with a DNS server as a mail server.
<Sample settings>
E-mail domain name
Copier IP address
Copier's self-registered domain name
DNS server setting for xyz.co.jp
If the settings are specified as shown in the above example, e-mail
addressed to "abcde.xyz.co.jp" will be received by this copier.
Scanner Mode
- - -
G
- -
L
- -
L
- -
L
- -
2
- -
- - -
- - -
- - -
- - -
xyz.co.jp
192.168.100.200
abcde.xyz.co.jp
abcde.xyz.co.jp MX192.168.100.200
3
- - -
- - -
- - -
- - -
- - -
3-5