By Typing In The Address - Minolta Scanner Mode User Manual

8
5
If [One-Touch] is touched,
For details, refer to "Selecting a Recipient From the List on the One-
Touch Screen" on page 4-5.
❍
To check the information, touch [10-key Dialing], and then move
the cursor over
registered in the one-touch key. Move the cursor using [←] and
[→].
❍
To change the address, touch [10-key Dialing], and then either
move the cursor using [←] and [→] or press the [C] (clear) key and
type in the new information. To delete the one-touch key selected
by the cursor, touch [Delete].
Touch [Alpha] to return to the previous screen.
❍ To enter another address, touch the next one-touch key that you
wish to specify.
6
Press the [Start] key.
The transmission begins.

By typing in the address

1
Position the document(s) to be faxed.
2
Press the [Fax/Scan] key.
❍
For a copier, press the [Scan] key.
3
Touch [Chain Dial].
4
In the 10-Key Dialing screen, touch [Com. Mode], and then touch
[InternetFAX], then [E-mail].
5
Type in the e-mail address.
Refer to "Basic Transmission" on page 8-1.
❍
To change the address, either move the cursor using [←] and [→]
or press the [C] (clear) key, and then type in the new information.
To delete the one-touch key selected by the cursor, touch [Delete].
Tip
If a frequently used domain name is registered in a domain name
button, the e-mail address can be entered more easily. Refer to
"Programming a domain name button" on page 3-27.
6
Press the [Start] key.
The transmission begins.
8-36
Performing an Internet Fax/IP Address FAX Operation
appears.
. Touch [DetailDest.] to display the address
Scanner Mode