Minolta Scanner Mode User Manual page 262

Specifying Management Settings
13.13 Specifying Software Switch Settings (Machine
Functions)
Various functions of this copier are already specified when it is purchased.
However, by using the software switch settings, the functions can be
changed to meet your specific needs.
Precautions
G Do not change any modes or bits other than those described in this
manual.
Software switch settings
G [Mode Selection]: Specify the three-digit number for the parameter
that you wish to specify with the software switch settings.
G
[Bit Selection]: The bits are the eight numbers that construct the mode.
By specifying a binary number (0 or 1) for each of the bits (0 through
7), each function can be specified.
G [HEX Selection]: Specify a setting for each mode as a hexadecimal
number (0 through 9 and A through F).
For example, to specify the bit setting "00110000", specify the
hexadecimal setting "30".
Reference: Examples of [Bit Selection] binary numbers and [HEX
Selection] hexadecimal numbers
Decimal number
Scanner Mode
[Bit Selection] binary
numbers
0
1
2
3
4
5
6
7
8
9
10
11
12
13
[HEX Selection]
hexadecimal numbers
0000 0000
0000 0001
0000 0010
0000 0011
0000 0100
0000 0101
0000 0110
0000 0111
0000 1000
0000 1001
0000 1010
0000 1011
0000 1100
0000 1101
13
00
01
02
03
04
05
06
07
08
09
0A
0B
0C
0D
13-43