Selecting The Display Language; Using The Domain Name Buttons; Programming A Domain Name Button - Minolta Scanner Mode User Manual

Preparation

Selecting the Display Language

If necessary, the language in which PageScope Light pages are displayed
can be changed. This setting only applies to PageScope Light pages.
1
Log into PageScope Light in Administrator mode.
2
Click [Preference] in the menu on the [System] tab.
3
Select the desired language for PageScope Light.
4
Click the [Apply] button.
3.2.4

Using the Domain Name Buttons

If domain names (characters after @ at the end of the e-mail address,
such as "@xyz.com") are registered in the domain name buttons, recipient
e-mail addresses can quickly and correctly be specified.

Programming a domain name button

1
Press the [Utility] key on the copier control panel.
2
Touch [User Set].
3
Touch [Fax Input].
❍ For a copier, touch [E-mail Input].
Scanner Mode
3
3-27