Specifying Settings Concerning The Confirmation Screen For Broadcast Transmissions (Mode 014); Setting During Production; Specifying The Setting - Minolta Scanner Mode User Manual

Specifying Management Settings
13.13.2Specifying Settings Concerning the Confirmation
Screen For Broadcast Transmissions (Mode 014)
You can specify whether or not a screen asking for confirmation of the
settings is displayed before a broadcast transmission.

Setting during production

Bit
Setting

Specifying the setting

During the production of this unit, the settings in the shaded cells were
selected. The numbers on the right side are page number with
descriptions for the corresponding function.
Bit
7, 6, 5,
4, 3, 2
1, 0
Scanner Mode
7 6 5 4 3 2
0 0 0 0 0 0
Function
-
Specifies whether or not a
screen asking for
confirmation of the settings
is displayed before a
broadcast transmission.
1 0
0 0 (HEX:01)
Setting Description
000000 *Do not change these bits.
00 The setting confirmation
screen is not displayed.
01 The setting confirmation
screen is displayed before
a broadcast transmission.
10 The setting confirmation
screen is normally
displayed, regardless of
whether a broadcast
transmission is being
performed.
11 *Do not change this
setting.
13
Page
referen
ce
-
p. 8-32
13-47