Minolta Scanner Mode User Manual page 256

Specifying Management Settings
5
Touch [F-CODE].
6
Use the keypad to type in
the F code, and then touch
[Enter].
Tip
To change a number,
touch [←] and [→] to
move the cursor to the
number that you wish to
change, and then touch
[Delete] to erase the number above the cursor.
To erase all numbers, press the [C] (clear) key.
7
Touch [F-CODE Password].
8
Use the keypad to type in
the F code password, and
then touch [Enter].
Tip
To change a number,
touch [←] and [→] to
move the cursor to the
number that you wish to
change, and then touch
[Delete] to erase the number above the cursor.
To erase all numbers, press the [C] (clear) key.
9
Touch [Remote Input Check].
Scanner Mode
13
13-37