Table of Contents
Advertisement
15
IP address faxing
Problem
Transmission
is not possible.
Internet fax receptions
Problem
Reception is
not possible.
15-10
Cause
The connections are incorrect.
Since the image data is too
large, a timeout occurred at
the receiving end.
The settings necessary for the
device are not registered.
The LAN cable is damaged.
Other causes
Cause
The connections are incorrect.
The setting to not
automatically check for new e-
mail messages has been
specified.
The settings necessary for the
device are not registered.
The same POP3 user name is
being used by a different e-
mail application or another
user.
The LAN cable is damaged.
Troubleshooting
Remedy
Check the LED indicator on
the hub and check the
connections.
• Increase the timeout setting
on the receiving end.
• Decrease the size of the
image data, and then try
sending it again.
Specify the necessary
network settings.
Replace the LAN cable.
Touch [Com.] on the Job List
screen to check the details of
the transmission error, and
then refer to the table of error
codes.
Remedy
Check the LED indicator on
the hub and check the
connections.
Specify a time interval for
automatically checking for
new e-mail messages.
Specify the necessary
network settings.
Do not use the same POP3
user name that is used by a
different e-mail application.
Replace the LAN cable.
Scanner Mode
Page
referen
ce
-
-
p. 3-3
-
p. 8-40,
p. 15-3
Page
referen
ce
-
p. 3-1
p. 3-1
-
-
Advertisement
Table of Contents
