Specifying The Transmission Source Name - Minolta Scanner Mode User Manual

Performing an Internet Fax/IP Address FAX Operation

Specifying the transmission source name

1
Touch [Set 1], and then
touch [TSI].
2
Select the transmission
source name, and then
touch [Enter].
❍
To cancel the setting,
touch [Cancel].
Note
The date and the name of
the transmission source
must be specified in
advance.
For details on specifying the date, refer to "Specifying the Date and
Time" on page 13-12.
For details on registering transmission source names, refer to
"Programming the Transmission Source Name" on page 13-17.
For details on specifying the transmission source name, refer to
"Specifying Transmission Settings" on page 13-21.
Scanner Mode
8
8-23