Table of Contents
Advertisement
15
IP Scanner
Error
Code
EAXXXX
Network FAX (Gateway TX)
Error
Code
E53XXX
E65XXX
EBXXXX
15-8
Cause
Image Receiver did not start up.
Data from another scanner is
being received.
The IP address specified by the
sender is incorrect.
The IP address of the sender is
not specified correctly with
settings from Image Receiver.
Image Receiver is not operating
correctly.
The LAN cable is not connected.
The network settings on the
computer are not specified
correctly.
The network load on the sender's
computer is too high.
Too much data is being sent.
Cause
Since the recipient specified for
gateway transmission is incorrect,
transmission is not possible.
An attempt was made to send
data that cannot be sent through
a gateway transmission.
An attempt was made to send an
e-mail message with a file
attachment in a format other than
TIFF-F or with text where one
line exceeds 1000 characters.
Data sent through a gateway
transmission cannot be received.
Troubleshooting
Remedy
Start up Image Receiver.
Try sending again after the
reception is finished.
The sender should specify the
correct IP address.
Erase the IP address specified in
Image Receiver, and then quit
and restart Image Receiver.
Restart the computer.
Re-install IP Scanner.
Check the TCP/IP settings on the
computer.
Check that the LAN cable is
correctly connected.
Check the TCP/IP settings on the
computer.
Check that large e-mail
messages are not being sent
from the sender's computer and
that large files are not being
downloaded from the Web.
If a high scanning resolution has
been specified, reduce the pages
and scan again.
Remedy
Check with the sender.
Check with the sender.
Check that the mail server can
transmit and that the network
settings are correct.
Page
referen
ce
p. 10-1
-
-
p. 10-1
p. 3-29
p. 2-12
-
-
-
Page
referen
ce
-
-
p. 3-3
Scanner Mode
Advertisement
Table of Contents
