Table of Contents
Advertisement
10
Scanning documents (from the copier)
1
Position the document(s) to be scanned.
2
Press the [Extra Scan] key.
3
Touch the scanner button for
the destination of the scan.
4
Press the [Start] key.
Note
Only one scanner button can be programmed from a single computer
(same IP address).
A maximum of six scanner buttons on a copier can be programmed.
If the maximum number of scanner buttons is reached, they can be
deleted from the touch panel.
Select the scanner button that you wish to delete, and then touch
[Del.].
When a scanner button is deleted from the touch panel, the message
"Ready" remains displayed on the computer. If this occurs, click the
[Delete Scanner Key] button from the computer, and then follow the
instructions that appear to return to the Scanner Settings dialog box.
10-24
Using IP Scanner
Scanner Mode
Advertisement
Table of Contents
