Pagescope Light - Minolta Scanner Mode User Manual

15

PageScope Light

Problem
A connection
with
PageScope
Light cannot
be
established.
Login failed.
The text in the
window is
disorganized.
Japanese text
is not
displayed.
Items that do
not match the
device
configuration
are displayed.
"•" appears in
the window.
Some deleted
characters
remain in the
window.
15-18
Cause
The IP address for the device
is not specified correctly.
The URL setting in the Web
browser is incorrect.
The settings in the Web
browser are incorrect.
If a proxy is specified with the
browser and the IP address of
this copier cannot be
recognized by the proxy
server, the MFP agent window
cannot be display.
The LAN cable is damaged.
Before logging in this time, a
different user name and
password had been entered to
log in.
The browser is too small.
An appropriate font size is not
selected.
The correct encoding setting
is not selected.
Settings that do not match the
device configuration are not
available when specifying
settings. They do not have any
effect on the actual settings.
Depending on the browser,
this character may appear.
The operation differs
depending on the browser
used.
Troubleshooting
Remedy
Specify the IP address.
In the "Address" box, type the
IP address of the specified
device.
Even though the device can
be accessed, certain settings
must be specified according to
the network configuration in
order to establish a
connection. For details,
contact your network
administrator.
Use the proxy settings in the
browser to add the IP address
of this copier to the list of
exceptions that the proxy
server will not use.
Replace the LAN cable.
Once login is successful, that
user name and password is
saved in the browser until the
browser is closed. Close the
browser, and then start it up
again.
Increase the size of the
browser.
Specify an appropriate font
size for the computer and in
the browser.
Select the Shift-JIS encoding
setting.
-
-
Reload the browser window or
rescan.
Scanner Mode
Page
referen
ce
p. 3-1
-
-
-
-
-
-
-
-
-
-
-