13
13.6
Specifying the Language of the Reports and the
Transmission Source Name
The language used for the TSI source name and for the reports can be
specified.
Specifying the setting
1
Touch [Admin. 1], and then touch [Initial Settings].
❍
Refer to "Displaying the Administrator Management screen" on
page 13-11.
2
Touch [Language (Com.)].
3
Select the desired language, and then touch [Enter].
4
Continue touching [Enter] to return to the Utility screen, and then touch
[Exit] to return to the standby screen (initial screen).
13-16
Specifying Management Settings
Scanner Mode