Inserting The Film Holder Fh-U1 Or Sh-U1; Inserting The Aps Adaptor Ad-10; Specifying The Film Type - Minolta Dimage Scan Elite II Instruction Manual

INSERTING THE FILM HOLDER
INSERTING THE APS ADAPTOR AD-10 (SOLD SEPARATELY)
1 Open the front door of scanner until the top of
the door lines up with the APS mark –
2 With the scanner contacts face up, insert the
adaptor into the scanner until it stops.
• The scanner detects the holder and automatically loads the
film from the cassette.
• To eject the holder, push the eject button. The scanner will
automatically rewind the film. Do not remove the adaptor until
the rewind motor has stopped.
• When the scanner is not in use, close the front door.

4. SPECIFYING THE FILM TYPE

When the Easy Scan Utility is launched, the easy scan wizard appears. Simply follow the instruc-
tions on the scan wizard to scan images.
Select the film format and film type to be scanned
on the pull-down menus. Click "Next >".
• The following film formats can be chosen:
- 35mm and APS cassette
• The following types of film can be selected:
- Colour negative, colour positive, B&W negative, B&W positive.
• Film for slides is a positive film. Film for prints is a negative film.
TIPS
• With pull-down menus, click on the arrow
menu to display the list. Highlight the item with the mouse
and then click it to make the selection.
• With or boxes, simply click on the box to select the
item.
• To return to a previous screen, click the "<Back" button at the
bottom of the window.
26
.
next to the