Internet Fax Transmissions/Scan To E-Mail Transmissions - Minolta Scanner Mode User Manual

Troubleshooting
Error
Code
EF2508
EF2509

Internet fax transmissions/Scan to E-mail transmissions

Error
Code
E4DXXX
E5AXXX
E5DXXX
E6FXXX
EAXXXX
EABXXX
Scanner Mode
Cause
An error other than those listed
above occurred with the SMTP
server.
The memory has become full.
Cause
Since the SMTP server address
is not specified, a connection to
the mail server cannot be
established.
Since the DNS setting is
incorrect, transmission is not
possible.
Since the e-mail address or e-
mail address of the recipient is
not specified correctly,
transmission is not possible.
An attempt was made to send
data that is too large to be sent.
The LAN cable is not connected
or the transmission to the SMTP
server failed. Otherwise, an
attempt was made to send the
data to the wrong recipient
address.
Verification of POP3 before
SMTP failed.
Remedy
Check that the SMTP server can
transmit.
Change the resolution to "Fine"
or "Standard".
Remedy
Specify the SMTP server
address.
Check the DNS settings.
Check the settings and the e-mail
address of the recipient.
Even though scanning may have
finished, it may not be possible to
send some documents.
Change the resolution to "Fine"
or "Standard".
Check that the LAN cable is
correctly connected, that
transmission is possible to the
SMTP server, that the network
settings, such as the subnet
mask, are correct, and that the
recipient's e-mail address is
correct.
Check the POP3 account and
password.
15
Page
referen
ce
-
p. 4-18
Page
referen
ce
p. 3-3
p. 3-3
p. 3-3,
p. 8-1
p. 8-16
p. 2-12,
p. 3-3,
p. 8-1
p. 3-3
15-5