Function 42: Announce Extension Number; Function 43: Automatic Day/Night Mode Table - ESI IP 200 Installation Manual

IP Series Installation Manual
4. Destination
Each branch type has different possible destinations as indicated:
Branch Type
Menu
GoTo
Directory
Additional notes
• Automatic disconnect — If ID9999 is programmed as a destination, the call will be automatically
disconnected.
• Call forward busy/no answer — Can be programmed (and will be prompted for) only if a trunk-to-
trunk outdial number is the destination of a GoTo branch.
• Call forward no response — Programmed (and will be prompted for) only for a menu or
directory branch.
• Deleting a branch — To delete a previously created branch, enter the branch ID, press HOLD, and
confirm by pressing a scroll (

Function 42: Announce extension number

If a caller selects a name from a Directory Branch, the system can be set to announce the extension
number prior to transferring the call. This provides the caller with the extension number for future
direct dialing from a Menu Branch such as the Main Greeting. This feature should not be used
where individual privacy is desired.
Default: Enabled.

Function 43: Automatic day/night mode table

You program the day/night mode table by selecting the day of the week, then entering the start
time, and then selecting the mode — day, night, day2 or night2. At the time you've programmed,
the appropriate greeting for that mode will play and the system will follow the appropriate day or
night forwarding. Day forwarding is the same for both day mode and day2 mode; night forwarding
is the same for both night mode and night2 mode. Enter the times in military time (0000–2359).
Each day can have up to six different times.
Note: Only branches ID1 through ID8 have a day, day2, night and night2 greeting.
1. Select the day of the week by pressing a scroll (
2. Press # to confirm.
3. Enter the day's start time in 24-hour format.
4. Press # to confirm.
5. Select the mode — day, night, day2 or night2 — by pressing a scroll (
6. Press # to confirm.
7. Repeat steps 3–6 for the day's next setting or press # again to program another day.
8. When finished, press # again to exit.
Note: To delete an entry, press HOLD.
Note: The system must be in the auto mode to follow the schedule.
Destination(s)
Sub-branches (choices 1–8)
Dial, mailbox, branch or outdial
List of names (entered in Function 62) — all or alpha
or ) key and #.
Function 4: Auto attendant programming
or ) key.
or ) key.
G.5