Key Expansion Console; System Capacity - ESI IP 200 Installation Manual

Hardware overview/installation

64-Key Expansion Console

The 64-Key Expansion Console adds 64 additional programmable feature keys to a station. The
Console is connected to its host phone via a standard six-conductor silver-satin cable that attaches
to the appropriate connector on the underside of the IP Feature Phone. The Console does not use
one of the 96 available station ports. AC power for the expansion console is obtained from the IP
telephone's external transformer, through the connector cable.
Note: Up to 20 consoles can be installed in a fully-configured system.

System capacity

IP 200
The IP 200's 10 slots can hold any combination of port cards (with a maximum of two DLCs, whether
configured for T1 or PRI, supported). If two DLCs are installed and each of them provides its full 23
or 24 channels, the IP 200 will support only 18 to 20 more CO lines in its remaining eight slots.
Max configurations for IP 200
DLCs 600
(23 or 24
cards
chs. ea.)
2 —
2 3
1 5
— 10
— —
2 1
IP 40
The IP 40's two slots can hold up to one DLC; each can hold a 303 Card or 600 Card. The maximum
IP 40 configuration would include one 600 Card, one DLC and an RNC12 card: this yields 29 to 30
CO lines and 28 IP stations (of which up to 12 can be remote IP stations).
B.4
C A R D S
303 RNC12
cards cards
8 —
— —
4 —
— —
10 —
7 1
CO Analog Remote
lines ports channels
64–66 24
64–66 —
65–66 12
60 —
30 30
64–66 21
IP Series Installation Manual
Y I E L D
IP
stations
— 96
— 96
— 96
— 96
— 96
12 96