Table of Contents
Advertisement
IP Series Installation Manual
7. Remote-access IP address
Enter the remote-access IP address for the IP PBX. The display will default to the IP address entered
in Function 82 (see page K.1). If a Remote IP Feature Phone will use this address to connect to the
IP PBX, press # to confirm; if a Remote IP Feature Phone will use an alternate IP address to connect
to the IP PBX, enter that address and press # to confirm. "SAVE PARAMETERS?" will appear on the
display. If you have correctly entered the IP addressing parameters (items 1–7), press # to program
the parameters for any Remote IP Feature Phone; to abort programming, press * to restore the
system parameters to their previously set values.
8. Extension name
This is used for the LCD display, reports, and as a programming aid. The name's length can be no
longer than 10 characters (See "Entering alphanumeric characters," page C.2).
Default: The extension number.
9. CO line group
Assigns the extension's ability to access one or more CO line groups (9, 8, and 71–76).
Default: 9.
10. and 11. Call forward busy/no answer
The extension can be set to call forward busy/no answer to another extension (or department), a
mailbox or a branch ID for day mode and differently for night mode.
Default: The extension's mailbox.
12. Extension page zone assignment
Remote IP phones cannot participate in any page zones.
13. Operator translation
Extension 0 (Operator) programming requires:
• Programming call forwarding for day and night mode
• Entering the extension number, department, mailbox or branch ID to which calls are to be di-
rected when someone dials 0.
Default: 100.
Important: After completing the extension programming for a new Remote IP Feature Phone,
connect that phone to the IP PBX network. Repeat Function 31 extension pro-
gramming for this extension, pressing # at the appropriate times to confirm
previously entered values. (Performing this step again causes the IP PBX to send
the programming information to the Remote IP Feature Phone.)
Function 3: Extension programming
F.5
Hide quick links:
Advertisement
Table of Contents
