Table of Contents
Advertisement
Function 1: System parameters
3. Enter the number to be dialed (including the line group — 9, 8 or 71–76). Press the left scroll
key ( ) to delete any character or digit entered in error. Here's an example:
The number dialed in step 3 can be up to 30 digits long including the following special codes:
To insert a special code, press the right scroll key to select the desired special code: # , * , F or P.
Press # to confirm the inserted character and continue. Press # # to complete the entry.
Example:
To create a System Speed Dial number that dials 9, then 972-555-5644,
then pauses for 4 seconds and finally dials #104, enter:
9 9 7 2 5 5 5 5 6 4 4 (scroll to) P # (scroll to) P # (scroll to) "#" # 1 0 4 #
Deleting a speed dial number
To delete an entire speed dial number and name, delete the location number (6 X X) by pressing
HOLD or the left scroll key ( ) during step 1 in the speed-dialing procedure described above.
Function 18: Serial maintenance port baud rate
The system's serial ports are dedicated to SMDR and maintenance.
Range: Programmable for 300, 1,200, 2,400, 4,800, 9,600, 19,200, or 38,400 bps.
Default: 38,400 bps.
SMDR port
(Called "Port 1" in the display.) Real-time SMDR call records are continuously output to the SMDR port.
Maintenance port
(Called "Port 2" in the display.) A laptop PC can be connected to this port for on-line programming
and diagnostics. Reports generated in Function 7 are also output to this port.
Programming steps
1. Select the port by pressing a scroll key (
2. Press # to confirm.
3. Select the baud rate by pressing a scroll key (
4. Press # to confirm.
D.4
1.
Location no.
601
AUTO RENTL
Code
What it produces
#
# DTMF tone
* DTMF tone
*
F
Flash hook
P
2-second pause
or
2.
Name
Number
915552221212
) until the desired port is displayed.
or
) until the desired rate is displayed.
IP Series Installation Manual
3.
Hide quick links:
Advertisement
Table of Contents
