Dell S2810dn User Manual page 127

Group Role
Device Name
WPS Setup
SSID (Character string
following "DIRECT-
Passphrase
IP Address
Subnet Mask
Paired Device
Current Role
Current SSID
Reset Print Server
Purpose:
To initialize NVRAM (non-volatile RAM) for the network feature and reboot the printer. You can also initialize
NVRAM of the printer from Reset Defaults in the Printer Settings menu.
Values:
Initialize NIC NVRAM Memory
and restart printer.
Restart Printer
Security
The Security tab includes Set Password, SSL/TLS, IPsec, 802.1x, and IP Filter (IPv4).
Set Password
Purpose:
To set or change the password that is required to access the setup parameters of the printer from the Dell Printer
Configuration Web Tool. This page can also be displayed by clicking Set Password in the left frame.
NOTE:
To restore the password to the default (NULL), initialize the non-volatile memory (NVM).
NOTE:
You can set the password for access to
Values:
Administrator Password
Re-enter Administrator Password
Access denial by the authentication
failure of the Administrator
Displays the group role of the printer.
Specifies the printer name that identifies the Wi-Fi Direct network with up
to 32 alphanumeric characters. Confirm it when selecting the printer name
on your Wi-Fi mobile device.
Configures the Wi-Fi Direct network using WPS.
Specifies a name to identify the Wi-Fi Direct network. Up to 32
**"
) alphanumeric characters can be entered. "DIRECT-" cannot be changed.
Displays the passphrase. Confirm it when entering the passphrase into your
Wi-Fi mobile device.
Displays the IP address of the Wi-Fi Direct.
Displays the subnet mask.
Displays the number of the device currently connected to the Wi-Fi Direct
network.
Displays the current group role of the printer.
Displays the current SSID. Confirm it when selecting the Wi-Fi Direct
network name on your Wi-Fi mobile device.
Click Start to initialize NVRAM, revert network settings to the factory default settings, and
reboot the network capability.
Click Start to reboot the printer.
Admin Settings
Sets the password using up to 128 alphanumeric characters (excluding spaces and
colons).
Confirms the set password.
Sets how many times the failure in administrator authentication is allowed in total.
Sets the number from 5 to 255. If you set 0, this mode is disabled.
from Panel Lock in Printer Settings.
Dell™ Printer Configuration Web Tool
127