Moving the Printer
This section describes how to move the printer.
Two people are required to move the printer.
To prevent you from dropping the printer and getting backache or injuries, lift the printer by firmly gripping the
recessed areas on both sides of the printer. Never lift the printer by gripping any other areas.
If the optional 550-sheet feeder has been installed, uninstall the optional 550-sheet feeder before moving the printer. If
the optional 550-sheet feeder is not fixed securely to the printer, it may fall to the ground and cause injuries. For details on how to
uninstall the optional 550-sheet feeder, see "Removing the Optional 550-Sheet Feeder."
1 Turn off the printer and disconnect the power cord, interface cable, and any other cables.
The data in the memory are cleared when the printer is turned off.
2 Remove any paper in the output tray and retract the output tray extension.
3 Lift the printer and move it gently.
If you move the printer over a long distance, remove the toner cartridge from the printer to prevent toner from spilling,
and pack the printer inside a box.
Maintaining Your Printer