Network Connection Setup - Dell S2810dn User Manual

12 If you do not share your printer, select Do not share this printer. If you share your printer, select Share this printer
so that others on your network can find and use it. Click Next.
13 As the driver installation is completed, click Print a test page to verify installation. To use this printer as the default
printer, select the Set as the default printer check box.
14 Click Finish.

Network Connection Setup

For installing PCL and PS printer driver
1 Start the Dell Printer Easy Install program, following the procedures shown in "Starting Dell Printer Easy Install."
2 In the main menu window of Dell Printer Easy Install, click Connect.
3 Select Wireless or Ethernet Connection, and then click Next.
4 Select the printer you want to install from the printer list, and then click Next. If the target printer is not displayed
on the list, click the
manually. You may specify the IP address and port name at this point.
If you have installed this printer on the server computer, select the I am setting up this printer on a server check
box.
NOTE:
When using AutoIP,
address.
72
Installing Printer Drivers on Windows
(Refresh) button to refresh the list or click add printer manually to add a printer to the list
is displayed in the installer. Before you can continue, you must enter a valid IP
0.0.0.0
®
Computers