Setting Up The Printer In Another Connection Method - Dell S2810dn User Manual

Software and Documentation disc provided with the printer into your computer.
1 Insert the
The Dell Printer Easy Install program launches automatically.
NOTE:
If the Dell Printer Easy Install program does not launch automatically, follow the procedure below.
For Windows Server
Click Start Run, enter
box, and then click OK.
®
For Windows Vista
Click Start All Programs Accessories Run, enter
optical drive) in the Run dialog box, and then click OK.
®
For Windows 8, Windows
Point to the top or bottom right corner of the screen, and then click Search Type
®
Windows 8 and Windows Server
the drive letter of the optical drive), and then click OK.
2 Turn on the printer.
3 Wait until the screen changes or click Next.
Follow the instructions displayed on the screen.
4 Click Finish to exit the wizard when the Ready to Print! screen appears.
5 Eject the Software and Documentation disc.
If the Main Menu of Dell Printer Easy Install Appears Without Starting or Completing the Basic Setup
Set up the printer following the procedures described in "Setting Up the Printer in Another Connection Method."

Setting Up the Printer in Another Connection Method

You can set up the printer, specifying the connection method other than the one used in the basic setup.
Before starting the setup procedure below, make sure that the printer is turned off, and ensure the cable connection
as described in "Basic Setup."
58
Connecting Your Printer
® ®
2008 and Windows Server
D:\setup_assist.exe
®
and Windows 7
® ®
8.1, Windows Server
®
2012 only), and then click Run Type
2008 R2
(where D is the drive letter of the optical drive) in the Run dialog
D:\setup_assist.exe
®
2012, and Windows Server
D:\setup_assist.exe
(where D is the drive letter of the
2012 R2
in the search box, click Apps (for
Run
(where D is