To set the default print quantity. (Set the number of copies required for a specific job from the printer driver. Values
selected from the printer driver always override values selected from the operator panel.)
Available Range: 1–999
To specify whether to enable the Image Enhance feature, which makes the boundary line between black and white
smoother to decrease jagged edges and enhance the visual appearance.
To help isolate the source of a print job problem. With Hex Dump selected, all data sent to the printer is printed in
hexadecimal and character representation. Control codes are not executed.
To save toner by printing in the draft mode. The print quality is reduced when printing in the draft mode.
Sets the value in increments of 1.
Disables the Image Enhance feature.
Enables the Image Enhance feature.
Disables the Hex Dump feature.
Enables the Hex Dump feature.
Does not print in the draft mode.
Prints in the draft mode.
Understanding the Printer Menus