Download  Print this page

Envelopes; Labels - Dell S2810dn User Manual

Smart printer.
Hide thumbs

Advertisement

Envelopes

Depending on the envelopes, it is possible to expect variable levels of wrinkling. It is recommended that you try a
sample first before buying large quantities of any print media. See "Loading Envelopes in the MPF" for instructions
on loading envelopes.
When printing on envelopes:
Use only high-quality envelopes that are designed for use in laser printers.
Set the print media source to the MPF. Set the paper type to Envelope, and select the correct size of envelope from
the printer driver.
Use envelopes made from 75 g/m
envelope feeder as long as the cotton content is 25 % or less. Envelopes with 100 % cotton content must not exceed
2
90 g/m
(24 lb bond) weight.
Use only freshly unpackaged, undamaged envelopes.
Use envelopes that can withstand temperatures of 205 °C (401 °F) without sealing, excessive curling, wrinkling, or
releasing hazardous emissions. If you have any doubts about the envelopes you are considering, check with the
envelope supplier.
Adjust the guide to fit the width of the envelopes.
To load an envelope into the MPF, insert the envelope with the flaps closed or open and the short-edge of the
envelope facing into the printer. The print side must be facing up.
See "Loading Envelopes in the MPF" for instructions on loading envelopes.
Use one envelope size during a print job.
Ensure that the humidity is low because high humidity (more than 60 %) and the high printing temperatures may
seal the envelopes.
For best performance, do not use envelopes that:
Have excessive curl or twist
Are stuck together or damaged in any way
Contain windows, holes, perforations, cutouts, or embossing
Use metal clasps, string ties, or metal folding bars
Have an interlocking design
Have postage stamps attached
Have any exposed adhesive when the flap is in the sealed or closed position
Have nicked edges or bent corners
Have rough, cockle, or laid finishes

Labels

Your printer can print on many labels designed only for use with laser printers.
When selecting labels:
Label adhesives, face sheet (printable stock), and topcoats must be able to withstand temperatures of 205 °C (401
°F) and pressure of 25 pounds per square inch (psi).
Use labels that can be without sealing, excessive curling, wrinkling, or releasing hazardous emissions.
Do not use label sheets with a slick backing material.
CAUTION:
Before buying large quantities of any print media, it is recommended that you try a sample first.
2
(20 lb bond) paper. You can use up to 105 g/m
2
(28 lb bond) weight for the
Print Media Guidelines
177

Advertisement

Table of Contents

   Also See for Dell S2810dn

   Related Manuals for Dell S2810dn

Comments to this Manuals

Symbols: 0
Latest comments: