Changing The Language; When Using The Operator Panel; When Using The Tool Box; Setting The Power Saver Timer Option - Dell S2810dn User Manual

Changing the Language

To change the language used on the LCD panel:

When Using the Operator Panel

1 Press the (Menu) button.
2 Press the button until Panel Language is highlighted, and then press the
3 Press the button until the desired language is highlighted, and then press the

When Using the Tool Box

1 Click Start All Programs

The Tool Box opens.
2 Click the Printer Maintenance tab.
3 Select Panel Language from the list at the left side of the page.
The Panel Language page appears.
4 Select the desired language from Panel Language, and then click Apply New Settings.

Setting the Power Saver Timer Option

You can set the power saver timer for the printer. The printer enters the power saver mode when the printer is not
used for a certain period of time. If the Power Off Timer is set to Auto Detect or On, the printer
automatically turns off after a specified period of time passes in deep sleep mode.
NOTE:
If
Panel Lock Control
menu.
Settings
NOTE:
Power Off Timer feature is available only in certain regions.
NOTE:
When the printer is connected to a network via Ethernet or Wireless and
, the printer will not turn off automatically. To use the Power Off Timer feature with a network connected printer, set
Detect
Power Off Timer
To set the power saver timer:
1 Press the
(Menu) button.
2 Press the button until Admin Settings is highlighted, and then press the
3 Press the
button until System Settings is highlighted, and then press the
4 Ensure that Power Saver Timer is highlighted, and then press the
5 Press the button until the desired setting is highlighted, and then press the
6 Press the or
button.
You can specify from 1 to 60 minutes for Sleep or 1 to 60 minutes for Deep Sleep.
You can specify from 60 to 1440 minutes for Power Off Timer, if you set Power Off Timer to Auto
Detect or On.
To return to the top menu, press the
Dell Printers Dell Smart Printer - S2810dn
 
is set to
Enable
to .
On
button or enter the desired value using the number pad, and then press the
(Menu) button.
Tool Box.

, you need to enter the four-digit password to enter the
Power Off Timer
(Set) button.
(Set) button.
(Set) button.
Admin
is set to
Auto
(Set) button.
(Set) button.
(Set) button.
(Set)
95
Operator Panel