Download  Print this page

Dell S2810dn User Manual Page 115

Smart printer.
Hide thumbs

Advertisement

Reset Defaults
Purpose:
To initialize the non-volatile (NV) memory. After executing this function and rebooting the printer, all the menu
parameters are reset to their default values.
Values:
Reset Defaults and
Click Start to reset the default setting and restart the printer.
restart printer.
Power On Wizard
Click Start to perform initial setup for the printer.
Initialize PrintMeter
Purpose:
To initialize the print meter of the printer. When the print meter is initialized, the meter count is reset to 0.
Storage
NOTE:
Storage feature is available only when RAM Disk is enabled.
Purpose:
To clear all files stored in the RAM disk.
Values:
*1
Clear Storage
All Clear
Secure Document Click Start to clear all files stored as Secure Print, Proof Print, Private Mail Box
Stored Document Click Start to clear all files stored in the RAM disk.
*1
This item is available only when RAM Disk is enabled.
Non-Dell Toner
Purpose:
To use toner cartridge of another manufacturer.
WARNING:
Using a non-Dell toner cartridge may severely damage your printer. The warranty does not cover damages caused
by using non-Dell toner cartridges.
Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed.
The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are
performed by specifying the altitude of the location where the printer is being used.
StaticMemory Ctr
Purpose:
To widen the print gap not to leave toner streak on the next page.
Click Start to clear all files stored as Secure Print, Proof Print, Private Mail Box
Print, and Public Mail Box Print in the RAM disk.
Print, and Public Mail Box Print in the RAM disk.
Dell™ Printer Configuration Web Tool
115

Advertisement

Table of Contents

   Also See for Dell S2810dn

   Related Manuals for Dell S2810dn

Comments to this Manuals

Symbols: 0
Latest comments: