Dell S2810dn User Manual page 109

Alert Tone
Out of Paper Tone
Low Toner Alert Tone
Auto Clear Alert Tone
All Tones
Low Toner Alert Message
Auto Log Print
RAM Disk
Panel Language
Auto Reset
Fault Time-out
Default Paper Size
Print ID
Print Text
Banner Sheet Insert Position
Banner Sheet Specify Tray
Substitute Tray
Letterhead 2 Sided
A4<>Letter Switch
A5<>Statement Switch
Report 2 Sided Print
Use Another Tray
Envelope Mode Mismatch
*1
Power Off Timer feature is available only in certain regions.
Network Settings
Purpose:
To Specify the PostScript 3 Compatible communication protocol for this printer.
Values:
PS Data Format Sets PostScript 3 Compatible communication protocol.
Sets the volume of the tone that is emitted when a problem occurs, or
disables the tone.
Sets the volume of the tone that is emitted when the printer runs out of
paper, or disables the tone.
Sets the volume of the tone that is emitted when the toner is low, or
disables the tone.
Sets the volume of the tone that is emitted 5 seconds before the printer
performs auto clear, or disables the tone.
Sets the volume of all the alert tones, or disables all the tones.
Alerts you if the toner is low.
Sets if a job history needs to be printed after every 20 jobs.
Sets whether to allocate RAM for the file system for the Secure Print, Proof
Print, Private Mail Box Print, and Public Mail Box Print features.
Used to set the language on the LCD panel.
Sets the amount of time before the printer automatically resets its settings
to the defaults when no additional settings are made.
Sets the amount of time the printer waits before canceling a job that stops
abnormally.
Sets the default print paper size.
Sets where to print the user ID on the output paper.
Sets whether the printer outputs PDL data (which is not supported by the
printer) as text when the printer receives it.
Sets where to insert a banner sheet in the output.
Sets from which tray a banner sheet is fed.
Sets whether to use another size paper when the paper that is loaded in the
specified tray does not match the paper size settings for the current job.
Sets whether to print on both sides of letterhead.
Sets whether to print A4 size jobs on Letter size paper if A4 is not available
in the paper trays and vice versa (Letter size job on A4 size paper).
Sets whether to print A5 size jobs on Statement size paper if A5 is not
available in the paper trays and vice versa (Statement size job on A5 size
paper).
Sets whether to print reports on both sides a sheet of paper.
Sets whether to show a message to select another tray when the specified
paper is not available in the paper tray.
Sets whether to display the alert window when the print job is started
without setting to the envelope mode.
Dell™ Printer Configuration Web Tool
109