Maintenance - Dell S2810dn User Manual

Power On Wizard
Purpose:
To perform initial setup for the printer.

Maintenance

Use the Maintenance menu to initialize the NV (non-volatile) memory, configure the plain paper quality
adjustment settings, and configure the security settings.
NOTE:
Values marked by an asterisk (*) are the factory default menu settings.
F/W Version
Purpose:
To confirm the current F/W version.
Service Tag
Purpose:
To confirm the service tag.
Express Code
Purpose:
To confirm the express service code.
Paper Density
Purpose:
To specify paper density settings.
Values:
Plain Light
Normal
Adjust Transfer Unit
NOTE:
The print quality changes depending on the setting values you select for this item.
Purpose:
To specify the transfer roller voltage adjustment for each paper type.
Values:
*
Plain 0
Available Range:
(Lighten) -5 to (Darken) +10
*
Plain Thick 0
Available Range:
(Lighten) -5 to (Darken) +10
*
Covers 0
Available Range:
(Lighten) -5 to (Darken) +10
160
Understanding the Printer Menus
*
Sets the transfer roller voltage in increments of 1. The default
settings may not give the best output on all paper types. If you see
mottles on the printed paper, try to increase the voltage. If you see
white spots on the printed paper, try to decrease the voltage.