Download  Print this page

Dell S2810dn User Manual Page 125

Smart printer.
Hide thumbs

Advertisement

Proxy Server
Purpose:
To configure the Proxy Server settings.
Values:
Proxy Server
Use Proxy Server
Address to Bypass Proxy
Server
Server Name
Port Number
Authentication
Login Name
Password
Re-enter Password
Wi-Fi
NOTE:
Wi-Fi feature is available only when the wireless adapter is connected.
Purpose:
To configure the detailed setting for the wireless network.
To use the wireless adapter, be sure to disconnect the Ethernet cable.
NOTE:
Once wireless LAN is activated, wired LAN protocol will be disabled.
Values:
Wi-Fi Settings
SSID
Network Type
MAC Address
Link Channel
Link Quality
Security Settings
Encryption
Sets whether to enable the use of a proxy server.
Sets the address to bypass proxy server.
Sets the name of the proxy server.
Sets the port number from 1 to 65535.
Sets whether to enable authentication.
Sets the login name for the proxy server.
Sets the login password for the proxy server.
Confirms the set password.
Sets the name that identifies the wireless network. Up to 32 alphanumeric
characters can be entered.
Sets the network type from either Ad-Hoc or Infrastructure.
Displays the MAC address of the wireless adapter for the printer.
Displays the channel number of the wireless connection for the printer.
Displays the quality of the wireless network connection for the printer.
Select the encryption type from the list.
No Security
WEP
WPA-PSK AES/WPA2-PSK
*1, 2
AES
WPA-Enterprise
AES/WPA2-Enterprise
*2, 3
AES
Sets No Security to configure the wireless
settings without specifying an encryption
type from WEP , WPA-PSK, and WPA-
Enterprise.
Sets the WEP to use through the wireless
network.
Sets the WPA-PSK AES/WPA2-PSK AES to
use through the wireless network.
Sets the WPA-Enterprise AES/WPA2-
Enterprise AES to use through the wireless
network.
Dell™ Printer Configuration Web Tool
125

Advertisement

Table of Contents

   Also See for Dell S2810dn

   Related Manuals for Dell S2810dn

Comments to this Manuals

Symbols: 0
Latest comments: