3 Click Change.
The Configure Printer window opens.
4 Select Configure the IP address settings, and then click Next.
5 Follow the instructions displayed on the screen.
When Using the Operator Panel
For more information on using the operator panel, see "Operator Panel."
1 Press the
(Menu) button.
2 Press the
button until Admin Settings is highlighted, and then press the
3 Press the
button until Network is highlighted, and then press the
4 Press the
button until TCP/IP is highlighted, and then press the
5 Press the
button until IPv4 is highlighted, and then press the
6 Press the
button until Get IP Address is highlighted, and then press the
7 Press the
button until Panel is highlighted, and then press the
NOTE:
If the message
(
)
Back
button.
8 Press the
(Back) button.
9 Press the
button until IP Address is highlighted, and then press the
The cursor is located at the first octet of the IP address.
62
Setting the IP Address
This Setting Becomes Effective after Restart
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
is displayed, press the
(Set) button.