Dell S2810dn User Manual page 48

Auto SSID Setup
1 Press the (Menu) button.
2 Press the button until Admin Settings is highlighted, and then press the
3 Press the button until Network is highlighted, and then press the
4 Press the
button until Wi-Fi is highlighted, and then press the
5 Press the button until Wi-Fi Setup is highlighted, and then press the
The printer automatically searches the access points on wireless network.
6 Press the button until the desired access point is highlighted, and then press the
If the desired access point does not appear, go to "Manual SSID Setup."
NOTE:
Some hidden SSID may not be displayed. If the SSID is not detected turn on SSID broadcast from the router.
7 Enter the WEP key or pass phrase.
When the encryption type of the selected access point is WEP in step 6:
• Enter the WEP key, and then press the
When the encryption type of the selected access point is WPA, WPA2 or Mixed in step 6:
• Enter the pass phrase, and then press the
8 The Restart System screen appears.
9 Turn off the printer, and turn it on again to apply the settings.
Wireless LAN connection setting is complete.
Manual SSID Setup
1 Press the (Menu) button.
2 Press the
button until Admin Settings is highlighted, and then press the
3 Press the button until Network is highlighted, and then press the
4 Press the button until Wi-Fi is highlighted, and then press the
5 Press the button until Wi-Fi Setup is highlighted, and then press the
6 Press the button until Manual Setup is highlighted, and then press the
7 Enter the SSID, and then press the
8 Select the network mode from Infrastructure and Ad-hoc depending on your environment, and then press
the (Set) button.
If you select Infrastructure, proceed to step 9.
If you select Ad-hoc, proceed to step 10.
9 Select the encryption type from No Security, Mixed mode PSK, WPA2-PSK-AES, or WEP.
If you do not set security for your wireless network:
• Press the button until No Security is highlighted, and then press the
To use Mixed mode PSK, or WPA2-PSK-AES encryption:
Press the button until Mixed mode PSK or WPA2-PSK-AES is highlighted, and then press the
a
(Set) button.
Enter the passphrase, and then press the
b
48
Installing Optional Accessories
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.