Setting Up the Dell Printer Configuration Web Tool
Follow the procedures below to configure both the environment settings of your web browser and the operator panel
before using the Dell Printer Configuration Web Tool.
The Dell Printer Configuration Web Tool pages may be displayed unreadable if the pages were configured by the
language different from the language of your web browser.
Setting Up From Web Browser
For Internet Explorer
Setting Up the Display Language
1 Select Internet Options from Tools on the menu bar.
2 Select Languages in the General tab.
3 Specify the display language in order of preference in the Language list.
Italian (Italy) [it-IT]
Spanish (Traditional Sort) [es-ES tradnl]
German (Germany) [de-DE]
French (France) [fr-FR]
English (United States) [en-US]
Dutch (Netherlands) [nl-NL]
Norwegian (Bokmal) [no]
Setting the IP Address of the Printer to Non-Proxy
1 Select Internet Options from the Tools menu.
2 Click LAN Settings under Local Area Network (LAN) Settings in the Connections tab.
3 Do either of the following:
Clear the Use a proxy server for your LAN check box under Proxy server.
Click Advanced, and then specify the IP address of the printer in the Do not use proxy server for addresses
beginning with field under Exceptions.
Setting Up From Operator Panel
You can launch the Dell Printer Configuration Web Tool only when EWS is set to Enable (the factory default) on
the operator panel. Confirm the operator panel setting if you cannot launch the Dell Printer Configuration Web
Tool. For more information, see "Understanding the Printer Menus.
Dell™ Printer Configuration Web Tool