Download  Print this page

Print Quality Problems - Dell S2810dn User Manual

Smart printer.
Hide thumbs


Print media misfeeds or multiple feeds
The envelope is creased after printed.
Page breaks in unexpected places.
Print media does not stack neatly in the
output tray.
Cannot print from tray1 or the optional 550-
sheet feeder because the print media in
tray1 or the optional 550-sheet feeder is

Print Quality Problems

Some of the following procedures that use the Tool Box can also be performed using the operator panel or Dell Printer
Configuration Web Tool. For information on how to use the operator panel and Dell Printer Configuration Web Tool, see
"Understanding the Printer Menus" and "Dell™ Printer Configuration Web Tool."
The output is too light
Toner smears or print comes off
Random spots/Blurred images
The entire output is blank
Streaks appear on the output
Pitched dots
Troubleshooting Guide
Ensure that the print media you are using meets the specifications for your printer.
See "Supported Paper Types" for more information.
Fan the print media before loading it.
Ensure that the print media is loaded correctly.
Ensure that the width and length guides of the print media sources are adjusted
Ensure that tray1, the optional 550-sheet feeder (tray2), or the multi-purpose
feeder (MPF) unit is securely inserted.
Do not overload tray1, the optional 550-sheet feeder, or the MPF.
Do not force print media into the MPF when you load it; otherwise, it may skew or
Ensure that the print media is not curled.
Face the recommended print side up. See "Loading Print Media in Tray1 and the
Optional 550-Sheet Feeder" for more information.
Turn the print media over or around and try printing again to see if feeding
Do not mix print media types.
Do not mix reams of print media.
Remove the top and bottom curled sheets of a ream before loading the print
Load print media only when tray1, the optional 550-sheet feeder, or the MPF is
Wipe the retard rollers in tray1, the optional 550-sheet feeder, or the MPF with a
cloth moistened with water.
Make sure that the envelope is loaded in the MPF as instructed in "Loading
Envelopes in the MPF."
Increase the value for Time-Out using the operator panel, the Tool Box, or Dell™
Printer Configuration Web Tool.
Turn the print media stack over in tray1 or the MPF.
Load the print media into the MPF.


Table of Contents

   Also See for Dell S2810dn

   Related Manuals for Dell S2810dn

Comments to this Manuals

Symbols: 0
Latest comments: