Download  Print this page

Dell S2810dn User Manual Page 152

Smart printer.
Hide thumbs

Advertisement

Power Saver Timer
CAUTION:
If the Power Off Timer feature is set and the power is turned off, stored data in RAM Disk is cleared.
Purpose:
To specify the time for transition to power saver mode.
Values:
Sleep
10 minutes
Available Range: 1–60 minutes
Deep Sleep
10 minutes
Available Range: 1–60 minutes
*1
Power Off Timer
Auto Detect
On
Off
*1
Power Off Timer feature is available only in certain regions.
When you specify 1 minute for Sleep, the printer enters power saver mode 1 minute after it finishes a job. This
uses much less energy, but requires more warm-up time for the printer. Specify 1 minute if your printer shares an
electrical circuit with room lighting and you notice lights flickering.
Select a high value if your printer is in constant use. In most circumstances, this keeps the printer ready to operate
with minimum warm-up time.
Select a value between 1 and 60 minutes for the power saver mode if you want a balance between energy
consumption and a shorter warm-up period.
The printer automatically returns to the standby mode from the power saver mode when it receives data from the
computer. You can also change the status of the printer to the standby mode by pressing the
button on the operator panel.
If the Power Off Timer feature turns off the printer, the printer cannot be turned back on automatically. To turn the
printer back on, physically turn the power switch of the printer to On.
Auto Reset
Purpose:
To automatically reset the settings to the default settings and return to the standby mode after you do not specify
any settings for the specified time.
152
Understanding the Printer Menus
*
Specifies the time taken by the printer to enter Sleep mode after it
finishes a job.
*
Specifies the time taken by the printer to enter Deep Sleep mode
after it has entered Sleep mode.
*
*
180 minutes
Detects whether the printer is connected to a network via Ethernet
or wireless. If the printer is connected to a network, Power Off
Available Range:
Timer is disabled. If the printer is not connected to a network
60–1440 minutes
(connected via USB or Wi-Fi Direct), the printer automatically
turns off after the specified time has elapsed. Specify the time it
takes to automatically turn off the printer after it has entered Deep
Sleep mode.
*
180 minutes
Specifies the time it takes to automatically turn off the printer after
it has entered Deep Sleep mode.
Available Range:
60–1440 minutes
Disables Power Off Timer.
(Power Saver)

Advertisement

Table of Contents

   Also See for Dell S2810dn

   Related Manuals for Dell S2810dn

Comments to this Manuals

Symbols: 0
Latest comments: