Download  Print this page

Dell S2810dn User Manual Page 110

Smart printer.
Hide thumbs


USB Settings
To change USB settings on your printer.
USB Port
Enables the USB interface on your printer.
PS Data Format
Sets PostScript 3 Compatible communication protocol.
Job Time-out
Displays the amount of time the printer waits for data to arrive from the computer.
PCL Settings
To change the PCL settings.
Paper Tray
Sets the paper input tray.
Paper Size
Sets the paper size.
Custom Paper Size - Y
Sets the length of custom size paper. The available range is from 127 mm (5.0 inch) to 355 mm (14.0
Custom Paper Size - X
Sets the width of custom size paper. The available range is from 77 mm (3.0 inch) to 215 mm (8.5
Sets how text and graphics are oriented on the page.
2 Sided Print
Sets duplexing as the default for all print jobs.
Sets the font from the list of registered fonts.
Symbol Set
Sets a symbol set for the specified font.
Font Size
Sets the font size for scalable typographic fonts.
Font Pitch
Sets the font pitch for scalable mono spaced fonts.
Form Line
Sets the number of lines in a page.
Sets the number of copies to print.
Image Enhance
Sets whether to enable the Image Enhancement feature.
Hex Dump
Sets whether to help isolate the source of a print job problem. With Hex Dump selected, all data
sent to the printer is printed in hexadecimal and character representation. Control codes are not
Draft Mode
Sets whether to print in the draft mode.
Line Termination
Sets how to handle line terminations.
Ignore Form Feed
Sets whether to ignore blank pages that only contain Form Feed control codes.
A4 Wide
Sets whether to expand the printable area width.
Barcode Mode
Sets whether to enable the barcode mode, which is suitable for barcode printing.
Dell™ Printer Configuration Web Tool


Table of Contents

   Also See for Dell S2810dn

   Related Manuals for Dell S2810dn

Comments to this Manuals

Symbols: 0
Latest comments: