Disabling The Panel Lock; Resetting Defaults; When Using The Operator Panel - Dell S2810dn User Manual

NOTE:
If you change the password while Panel Lock is Enable, perform steps 1 to 4 above. Press the
Change Password is highlighted, and then press the
password. This will change the password

Disabling the Panel Lock

1 Press the (Menu) button.
2 Press the
button until Admin Settings is highlighted, and then press the
3 Press the button until Secure Settings is highlighted, and then press the
4 Ensure that Panel Lock is highlighted, and then press the
5 Ensure that Panel Lock Control is highlighted, and then press the
6 Ensure that Disable is highlighted, and then press the
7 Enter the current password, and then press the
The setting has been changed.

Resetting Defaults

After executing this function and rebooting the printer, all the menu parameters are reset to their default values.
The following menu parameters are exceptions and are not reset.
• Network settings
• Panel Lock settings and password
• Login Error settings
• Set Available Time settings
• Secure Job Expiration settings
• USB Port settings
• AccessCtrl Mode settings
• AccessCtrl Error Report settings
• Non Registered User settings

When Using the Operator Panel

1 Press the (Menu) button.
2 Press the button until Admin Settings is highlighted, and then press the
3 Press the button until Maintenance is highlighted, and then press the
4 Press the
button until Reset Defaults is highlighted, and then press the
5 Press the button until Start is highlighted, and then press the
The printer is restarted automatically.
(Set) button. Perform steps 7 and 8 above to change the
.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
Understanding the Printer Menus
button until
173