Download  Print this page

Dell S2810dn User Manual Page 130

Smart printer.
Hide thumbs

Advertisement

Re-enter Pre-Shared Key
IKE SA Lifetime
IPsec SA Lifetime
DH Group
PFS
Remote peers IPv4 address Sets the IP address to connect to.
Remote peers IPv6 address Sets the IP address to connect to.
Non IPsec communication
policy
NOTE:
If IPsec is enabled with incorrect settings, you must disable it using the IPsec menu on the operator panel.
802.1x
Purpose:
To specify the settings for IEEE 802.1x authentication for encrypted communication to the printer.
Values:
Configure 802.1x
Enable IEEE 802.1x
Authentication Method EAP-MD5
Login Name: (Device
Name)
Password
Re-enter Password
IP Filter (IPv4)
Purpose:
To specify the IP address and subnet mask to be permitted or denied access to the printer.
Values:
Access List
Address
Address Mask
Active Mode
To configure the IP Filter feature, enter an IP address to be filtered in the Address field and the subnet mask in the
Address Mask field. Enter a numeric value between 0 and 255 in each field. "*" is appended to the current value.
130
Dell™ Printer Configuration Web Tool
Enters the shared key again to confirm it.
Sets the lifetime for IKE SA from 5 to 28,800 minutes.
Sets the lifetime for IPsec SA from 5 to 2,880 minutes.
Sets the DH group.
Select the check box to enable the PFS setting.
Allows communication with a device which does not support IPsec.
Select the check box to enable IEEE 802.1x authentication.
Selects the authentication method to use for IEEE
802.1x authentication.
EAP-MS-
CHAPv2
PEAP/MS-
CHAPv2
Sets the login name (device name) for IEEE 802.1x authentication using
up to 128 alphanumeric characters.
Sets the login password for IEEE 802.1x authentication using up to 128
alphanumeric characters.
Confirms the set login password.
Sets the IP addresses that are permitted or denied access to the printer. Enter a
numeric value between 0 and 255 in each field.
Sets the subnet mask that are permitted or denied access to the printer. Enter a
numeric value between 0 and 255 in each field.
Reject
Rejects printing from specified network address.
Accept
Permits printing from specified network address.
Off
Disables the IP Filter feature for the specified IP address.

Advertisement

Table of Contents

   Also See for Dell S2810dn

   Related Manuals for Dell S2810dn

Comments to this Manuals

Symbols: 0
Latest comments: